Water Damage Restoration – What Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the home could be due to an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. The two main large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage as a result of water guide is the benchmark tool that is used by companies that specialize in restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the foremost and the most significant element of water damage restoration. The assessment has to be correct so that an appropriate response can be taken. In restorating the injury caused by water, technicians and also the insurance firms must work together and understand what is damaged and how to make restoring the damage. Identifying the source of the damage, documentation of damage, and accurate estimates are mandatory for any proper water damage restoration. Categorization is based on the contamination amounts of the water source. The categories are the following
Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This is water which includes some contaminants like water coming from a dishwasher, washing machine or toilet with urine.
Category 3 – This is water which is highly unsanitary and can do causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying – Following the evaluation is finished, the process of drying and decontaminating begins on the site. Based on the extent of damage, damage caused because of water can be classified into 4 types. Class 1 Damage- When loss is restricted to your small area and fewer water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – If the damage is always to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is really a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments must be used. Decontamination must be done if contamination has been detected in the region. Decontamination may be completed for the entire area or perhaps in specific pockets where contamination continues to be detected.
Monitoring and Completion – Monitoring the restoration procedure for damage caused because of damage is critical to achieve the desired results. One must be proactive through the monitoring process. Checking in the event the drying tools are setup properly, assessing when the personnel involved are qualified for the job and checking if the equipments will be in working order inwtsy all portion of the monitoring process. Necessary steps should be taken if something wrong is spotted through the monitoring process. The entire procedure of water damage and mold restoration will be classified as complete only once humidity, temperature and the moisture content is as per industry standards. Upon finishing of this type of water damage restoration process, the drying equipment can be removed.